The Branzino 138 is the final addition to the line-up (for now). This guitar delivers a solid and full sound - perfect for Rock, Country or R&B. No matter your genre, this guitar delivers what you need.
The Branzino 138 is powered by Seymour Duncan's Hot Rails® set. These dual blade humbucker pickups deliver, with booming low notes, subtle treble tones and full mid response. Choose to wire it straight up, or use a push-pull potentiometer for single-coil operation. This fire breathing beast with an unapologetic, mean sound, thats got the power of a set of full-sized high-output humbuckers
The Branzino 138 is a fire breathing beast with an unapologetic, mean sound thats got the power
Each guitar body is hand cut from selected reclaimed old growth woods. Each is then carefully sculpted using rasps, files and sandpaper, and each then goes through a unique proprietary process of heat and friction to seal the end grain.
Do what you have to do to play a LaValle Guitar and experience the tone and playability firsthand!
Ask About Color Choices. Guitars are shown in one option only.
Contact today: firstname.lastname@example.org
Each guitar is Made-to-Order. Because each guitar body is hand carved and painted, no two instruments, and no two of the same models, are exactly alike. EACH is its own piece of art, separate from the others. These are not mass-produced, and do require a 2-3 month wait time once ordered. Because each guitar is made-to-order, we cannot offer exchanges or returns. Full Details
The slower transference of acoustic energy from the non-glued neck yields a little more pop and attack from the string—in essence, it decouples the strings from the body and neck. The snap and pop of the bolt-on guitar neck emphasizes note definition. It adds a sharpness and firmness that contribute to a cutting tone, often called "twang".
One of the most common scale lengths is the 25-1/2" (648mm) guitar scale and found on a wide variety of instruments. The 25-1/2" scale produces a rich, strong, bell-like tone, and defined low-end.
Fingerboard: Made from hard rock Maple, with an inlaid "skunk stripe" down the back, and finished in clear satin polyurethane. Indian Rosewood fretboard with dot inlays and side markers.
Fret: .045" high x .095" wide (1.14mm x 2.41mm)
Number of Frets: 22
Width at nut: 1-5/8" (41.28mm)
Truss rod: single-action truss rod with a 4mm adjusting nut at the peghead.
Slotted nut: shaped from PPS plastic with a flat bottom.