Learn More!

Features & Specs

  • Schaller 3D-6 Bridge .::. Black
  • Dome Knobs .::. Black
  • Neck Mounting Plate .::. Black
  • Strap Buttons .::. Black
  • Flush-mount Output Jack .::. Chrome
  • TUSQ XL String Trees .::. Black
  • D'Addario Planet Waves Auto-Trim Tuning Machines .::. Black
  • DiMarzio EJ Custom Neck & Bridge Pickups .::. Black/Black, Standard spaced
  • DiMarzio Potentiometers .::. 500K-ohm
  • Orange Drop Capacitors .::. 0.022uF
  • Shown: Two-Tone (Green and Copper) Color-Shift Enamel Base, Clear Oil-Poly Top Coat
  • Solid Old Growth Fir
  • Hard rock Maple
  • Rosewood Fretboard
  • C-Profile
  • 22 frets
  • 25.5" scale
  • Elixir® Electric Nickel Plated Steel Strings with POLYWEB
  • 7.6 lbs
  • Weight is for reference only. Because each one of our guitars is hand-crafted, the weight may change depending the piece of wood we select for your guitar.
New Products For 2022
Built in the USA

Piranha 701

Don't let the name fool you. The Piranha 701 might sound mean, but it's more of a 'Country Gentleman', than a beast. This guitar is powered with dual vintage output DiMarzio EJ Custom™ pickups and produces a 'twangy' sound when played through a clean channel, then throw in some distortion, and this guitar powers up to 11 - ok, maybe it's just ten, but still it sounds like it has more power than it should.

The Piranha 701 is bright and has great presence without sounding thin.

Each guitar body is hand cut from selected reclaimed old growth woods. Each is then carefully sculpted using rasps, files and sandpaper, and each then goes through a unique proprietary process of heat and friction to seal the end grain.

Do what you have to do to play a LaValle Guitar and experience the tone and playability firsthand!

Price: $3,740.12

Ask About Color Choices. Guitars are shown in one option only.

Contact today: orders@lavalleguitars.com

All prices are subject to change without notice.

Each guitar is Made-to-Order. Because each guitar body is hand carved and painted, no two instruments, and no two of the same models, are exactly alike. EACH is its own piece of art, separate from the others. These are not mass-produced, and do require a 2-3 month wait time once ordered.  Because each guitar is made-to-order, we cannot offer exchanges or returns. Full Details

Bolt-on Neck

The slower transference of acoustic energy from the non-glued neck yields a little more pop and attack from the string—in essence, it decouples the strings from the body and neck. The snap and pop of the bolt-on guitar neck emphasizes note definition. It adds a sharpness and firmness that contribute to a cutting tone, often called "twang".

25-1/2" Scale

One of the most common scale lengths is the 25-1/2" (648mm) guitar scale and found on a wide variety of instruments. The 25-1/2" scale produces a rich, strong, bell-like tone, and defined low-end.


EJ Custom™- Neck

Tone Guide
Output: 178
Bass: 2.0
Low Mid: 3.0
High Mid: 3.0
Treble: 9.0

Magnet: Alnico 5
Resistance:7.01 Kohm

EJ Custom™- Bridge

Tone Guide
Output: 200
Bass: 3.0
Low Mid: 3.5
High Mid: 3.5
Treble: 8.5

Magnet: Alnico 5
Resistance:7.85 Kohm


Fingerboard: Made from hard rock Maple, with an inlaid "skunk stripe" down the back, and finished in clear vintage amber thin gloss polyurethane. Indian Rosewood fretboard with dot inlays and side markers.
Fret: .045" high x .095" wide (1.14mm x 2.41mm)
Number of Frets: 22
Radius: 9.5"
Width at nut: 1-5/8" (41.28mm)
Truss rod: single-action truss rod with a 4mm adjusting nut at the peghead.
Slotted nut: shaped from PPS plastic with a flat bottom.